LUCKY Fish Finder for Kayak, Depth Finder Range in 328FT by Wired Transducer Built-in Various Fishing Modes Options for Sea Fishing, Ice Fishing and Shore Fishing

For kayak fishing 1. Attach the Side-Scan Adapter to the boat hull using the mounting tabs; 2.Break though the hull of a boat. Place the sonar sensor against the hull bottom 1 inch underwater. 3. Fix the float position in advance. Cast the transducer and float into the water For ice fishing 1. You should

For kayak fishing
1. Attach the Side-Scan Adapter to the boat hull using the mounting tabs;
2.Break though the hull of a boat. Place the sonar sensor against the hull bottom 1 inch underwater.
3. Fix the float position in advance. Cast the transducer and float into the water

For ice fishing
1. You should clear the snow on the ice layer. Make sure the surface is smooth enough. Put the transducer directly on ice layer to detect fish distribution in purpose of selecting a place to drill a hole
2.There should be no air between the sensor and the ice and no air between ice layer and the underwater either. Otherwise, the fishing sonar will not work properly.
3. Cut a hole through the ice and put the sonar sensor directly in the water. Enjoy the fishing gear.

Specifications:
1. 2.2inch TN/ANTI-UV LCD Display
2. Detect Depth Range: 3ft~328.08ft (1m~100m) under sensor
3. Sensor coverage range: 45 degrees beam angle in 200Khz
4. Sensor Operating Temperature: -14°F to 122°F(-10°C-50°C)
5. Power Requirement: 4 x AAA batteries
6. Waterproof level: Level-4 (Spray-water-proof)
7. Measurement Unit: M/FT, °C/°F

Warm Tips
1. The fish lures and the fish smaller than 3.94inch can’t be detected by the fish finder.
2. You can use it on a moving boat/kayak, but make sure the speed is lower than 5mph.
3. The fish finder will be affected in performance by strong waves, suspended matter or muddy water.
4. It doesn’t work in swimming pool, fish tank or the water bucket. Make sure you are not in demo mode when you use it in fishing activities.

Product Features

  • ◆ Default Data Setting for Various Fishing Mode : You can freely choose General Mode, Shallow Mode, Slope Mode, Raft Mode or Ice fishing Mode according to your fishing environment. The related setting data was built-in different fishing modes accordingly. It is a concerned design for fishing beginners. The fishfinder can also remember before setting when you turn it on.
  • ◆ Depth and bottom contour Readout : It detects and displays water depth (max 328ft/100m), approximate fish location, short & tall weeds, sand & rocks on bottom. 2.2 inch LCD display offers you wide, clear and sun-visible visual experience.
  • ◆ Fish Alarm and temperature/air pressure Readout : It cannot only alert when fish or fish schools is appear, but also help you distinguish small fish and large fish. Meanwhile, you can read both air temperature and water temperature on the display. Air pressure is readable as well. It helps you to find out the relations between the fish and weather.
  • ◆ Convertible Triple Suction Cup Mount : The fish finder is fixed firmly to any smooth surface by the mount. Meanwhile, You can change to any other mount by the 1/4 inch standard screws, for example, tripod Mount, tube mount and so on.
  • ◆ Wide Applications : It is an ideal fish finder for kayak fishing, boat fishing, canoe fishing and float tube fishing. It is a good choice for kayak accessories. It will help you get more fish in sea fishing, ice fishing, shore fishing and other fishing circumstances.

HostPapa 100% Green Energy Web Hosting