Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn’t with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear before use !!!

About certification:
We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

STRICTLY FOR PROFESSIONAL USE ONLY

Please Note:
There are two pull starter included in the parcel(one is the machine, another one for spare)
We don’t supply wearing parts (pull starter)for free.

Specification:
Short Shaft:40cm
Overall length:92CM
Overall wideth:36.5cm
Overall height:22cm
Transom height:42cm
Full throttle perating range:4000-5000r/min
Maximum output:2.5kw(3.5HP)
Speed:10km/h
Type:2-stroke
Ignition system: CDI system
Starting system: Manual start
Staring carburetion system: Choke start
Propeller mark:7-1/45-A(inch)
The engine and the propeller ratio:2:1
Recommended fuel: Regular unleaded gasoline
Fuel to oil ratio: 25:1 （Please be suject to this version, and disregard the manual about this point）
Gear ratio: 27/13
Maximum speed: 10 km / h
Built-in fuel tank: 1.3L
Fuel consumption per hour: 1.5L

Product Features

• ☀ About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon
• ☀ The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same whenone person on it or 4 people on it
• ☀ It can be marched with inflatable boats, rubber boats or fishing boats
• ☀ Necessary: you have to prepare a boat-motor stand or Hanging board on your boat
• ☀ Two strokes 3.5 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode